Standard Procedure - Quick-Connect Fittings: Notes

WARNING: This page is about a different variant/trim than selected.

Different types of quick-connect fittings are used to attach the various fuel system components, lines and tubes. Some quick-connect fittings require the use of a special tool for disconnection and removal.

NOTE:

Care must be used when separating fittings. Over-flexing may cause the tube to become deformed or damaged.

These are the quick-connect fittings:

Redundant Latch Single Button Type Fitting.
Single Button Type Fitting.
Pinch Type Fitting.
Pinch Type Fitting With Lock Tab.
Single Tab Type Fitting.
Two Tab Type Fitting.
Plastic Retainer Ring Type Fitting.
Latch Clip Type 1 Fitting.
Latch Clip Type 2 Fitting.
Two Button Type Fitting.
Wing Type Fitting.