LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (3.6L Engine (Service Information)) >> Lubrication >> Sensor, Oil Temperature >> Installation

Sensor, Oil Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
GC0173767Courtesy of CHRYSLER GROUP, LLC
  1. Install the oil temperature sensor (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
    GC0173564Courtesy of CHRYSLER GROUP, LLC
  2. Connect the oil temperature sensor wire harness connector (1).
  3. Install the cowl extension. Refer to SILENCER, COWL EXTENSION, INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals