LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (3.6L Engine (Service Information)) >> Lubrication >> Sensor, Oil Pressure >> Installation

Sensor, Oil Pressure: Installation

WARNING: This page is about a different variant/trim than selected.
GC0173640Courtesy of CHRYSLER GROUP, LLC
  1. Install the oil pressure sensor (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
    GC0173574Courtesy of CHRYSLER GROUP, LLC
  2. Connect the oil pressure sensor wire harness connector (1).
  3. Install the upper and lower intake manifolds. Refer to MANIFOLD, INTAKE, INSTALLATION 
scientia non olet · About LEMON Manuals