LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (3.6L Engine (Service Information)) >> Lubrication >> Jet, Piston Oil Cooler >> Removal

Jet, Piston Oil Cooler: Removal

WARNING: This page is about a different variant/trim than selected.
GC0144300Courtesy of CHRYSLER GROUP, LLC
NOTE:

Piston oil cooler jet for cylinders one/two shown. Piston oil cooler jets for cylinders three/four and five/six are similar.

  1. Remove the crankshaft. Refer to REMOVAL 
  2. Remove the bolt (1) and the piston oil cooler jet(s) (2) from the engine block.
    GC0144299Courtesy of CHRYSLER GROUP, LLC
  3. Remove and DISCARD  the O-ring seal (1) from the piston oil cooler jet(s).
scientia non olet · About LEMON Manuals