LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (3.6L Engine (Service Information)) >> Cylinder Head >> Tube, Spark Plug >> Removal

Tube, Spark Plug: Removal

WARNING: This page is about a different variant/trim than selected.
GC0144834Courtesy of CHRYSLER GROUP, LLC
  1. Remove the ignition coils. Refer to 3.6L
  2. Using compressed air, blow out any dirt or contaminates from around the top of the spark plugs.
  3. Remove the cylinder head cover(s). Refer to COVER(S), CYLINDER HEAD, REMOVAL .
  4. Install the top half of the (special tool #2024900090, Installer, Spark Plug Tube) (1) into the spark plug tube to be removed (2).
    GC0144833Courtesy of CHRYSLER GROUP, LLC
  5. Using suitable locking pliers (1), remove the spark plug tube (2) from the cylinder head and discard the tube.
  6. Clean the area around the spark plug tube mounting with Mopar® Parts Cleaner or equivalent.
scientia non olet · About LEMON Manuals