LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (6.4L Engine (Service Information)) >> Lubrication >> Solenoid, Variable Valve Timing (VVTS), Exhaust >> Installation

Solenoid, Variable Valve Timing (VVTS), Exhaust: Installation

WARNING: This page is about a different variant/trim than selected.
GC0144407Courtesy of CHRYSLER GROUP, LLC
NOTE:

Ensure that the O-ring is fully seated into the cylinder block.

  1. Position the VVTS (3) into the cylinder block.
  2. Securely tighten the VVTS retaining bolt (2).
  3. Connect the VVTS electrical connector (1).
  4. Install the intake manifold. Refer to MANIFOLD, INTAKE, INSTALLATION .
scientia non olet · About LEMON Manuals