LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (6.4L Engine (Service Information)) >> Cylinder Head >> Diagnosis And Testing >> Diagnosis And Testing - Cylinder Head Gasket Failure >> Cylinder-To-Water Jacket Leakage Test >> Cooling System Tester Method

Cooling System Tester Method

WARNING: This page is about a different variant/trim than selected.
WARNING:

With cooling system tester in place, pressure will build up fast. Excessive pressure built up, by continuous engine operation, must be released to a safe pressure level. Never permit pressure to exceed 138 kpa (20 psi). Failure to follow this warning may result in serious or fatal injury.

Install Cooling System Tester (special tool #7700, Tester, Cooling System) or equivalent to pressure cap neck. Start the engine and observe the tester's pressure gauge. If gauge pulsates with every power stroke of a cylinder a combustion pressure leak is evident.

scientia non olet · About LEMON Manuals