LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Muffler, Exhaust >> Removal >> 6.4L

Muffler, Exhaust: Removal: 6.4L

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Support the exhaust system using a suitable jack.
  3. Saturate the nuts with Mopar® Rust Inhibitor. Allow 5 minutes for penetration.
  4. Remove the left exhaust resonator. Refer to RESONATOR, EXHAUST, REMOVAL .
    GC0190510Courtesy of CHRYSLER GROUP, LLC
  5. Remove the left rear exhaust isolator (1).
    GC0190514Courtesy of CHRYSLER GROUP, LLC
  6. Remove the ground strap (2).
  7. Remove the rear exhaust isolator (1).
    GC0190424Courtesy of CHRYSLER GROUP, LLC
  8. Remove the rear exhaust isolator (1).
    GC0190495Courtesy of CHRYSLER GROUP, LLC
  9. Remove the two exhaust isolators (1) from the muffler.
    GC0190487Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Muffler removal is a two-man operation.

  10. Remove the four spring nuts (1) and the muffler/tailpipe (2) assembly from vehicle.
scientia non olet · About LEMON Manuals