LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (Abs) (Service Information) >> Electrical >> Sensor, Wheel Speed, Front >> Removal

Sensor, Wheel Speed, Front: Removal

NOTE:

Wheel removed for clarity.

GC0146145Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    NOTE:

    The inner wheel well can be pulled slightly out for access to electrical connector without removing wheel well retainers.

  2. Disconnect the wheel speed sensor electrical connector (1).
  3. Disconnect the wheel speed sensor wiring routing clips (2, 3).
  4. Remove the wheel speed sensor wiring (4) from the brake flex hose bracket.
    GC0173604Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the sensor wire routing clips from the brake hose.
  6. Remove the wheel speed sensor wiring (3) from the knuckle (4).
  7. Remove the front wheel sensor mounting bolt (2) and remove the sensor (1) from the knuckle (4).
scientia non olet · About LEMON Manuals