LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Frame >> CROSSMEMBER, Transmission >> Installation

CROSSMEMBER, Transmission: Installation

GC0146313Courtesy of CHRYSLER GROUP, LLC
  1. Install the crossmember (1) and install the crossmember bolts (2).
  2. Tighten the crossmember bolts (2) to the proper specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Remove the lifting device.
  4. Install the rear engine mount bolts (3) and tighten to. Refer to TORQUE SPECIFICATIONS  .
  5. Install the crossmember reinforcement brackets and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS 
  6. Install the skid plate Refer to INSTALLATION 
scientia non olet · About LEMON Manuals