LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> ProMaster 3500 Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats, First Row >> Seat, Front >> Removal >> Non Swivel Seat

Non Swivel Seat

GC0160270Courtesy of CHRYSLER GROUP, LLC
WARNING:

Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.

  1. Place the seat into the full rearward position.
  2. Remove the front fasteners (1).
    GC0160207Courtesy of CHRYSLER GROUP, LLC
  3. Place the seat into the full forward position.
  4. Disconnect the electrical connectors (1).
  5. Remove the rear fasteners (2) and remove the seat.
scientia non olet · About LEMON Manuals