LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> ProMaster 3500 Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Doors - Sliding >> Board, Switch Contact >> Removal

Board, Switch Contact: Removal

  1. Fully open the sliding door.
  2. Disconnect and isolate the negative battery cable.
    GC0176867Courtesy of CHRYSLER GROUP, LLC
  3. Remove the plastic push pin (1) from the contact switch board and remove the switch from the door.
    GC0176879Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the switch wiring harness connector (2) and remove the switch (1).
scientia non olet · About LEMON Manuals