LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Exterior >> Molding, Rear Wheel Opening >> Removal

Molding, Rear Wheel Opening: Removal

GC0146424Courtesy of CHRYSLER GROUP, LLC
  1. Remove the two rear plastic rivets (2).
  2. Using trim stick (special tool #C-4755, Trim Stick) or equivalent, release the eight front push pin fasteners.
  3. Release the three rear retaining tabs (3) and remove the molding (1).
scientia non olet · About LEMON Manuals