Second Row Bucket Seat

NOTE:

It is not necessary to remove the seat from the vehicle.

Courtesy of CHRYSLER GROUP, LLC

Using a hook tool (2), hook the clip and pull downward. Then pull off the recliner handle (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the screw cover and the screw (1). If necessary to remove the lower panel, remove the two screws (2).

Courtesy of CHRYSLER GROUP, LLC
Use trim tool and remove the outboard side shield (1).

Courtesy of CHRYSLER GROUP, LLC
Separate the inboard side shield (3) from the lower panel (2).
Pull the bottom clips (1) loose and remove the lower panel.
Use a trim tool and remove the inboard side shield.