Torque Specifications
TORQUE SPECIFICATIONS
| Description | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| All Screws NOT Listed Below | 2 | - | 17 |
| A/C Compressor to Engine | Specific fastener placement and torque pattern required. Refer to COMPRESSOR, A/C, INSTALLATION . | ||
| A/C Expansion Valve Bolts (Front and Rear) | 11 | - | 97 |
| Air Distribution Housing Screws | 2.2 | - | 20 |
| Air Distribution Housing to HVAC Housing Screws | 2.2 | - | 20 |
| Air Inlet Housing to HVAC Housing Screws | 2.2 | - | 20 |
| A/C Pressure Transducer | 5.1 | - | 45 |
| A/C Underbody Refrigerate Line to Rear A/C Expansion Valve Nut | 11 | - | 97 |
| A/C Suction and Liquid Line Retaining Nut | 20 | 15 | - |
| Blower Motor Screws (Front and Rear) | 2.2 | - | 20 |
| Compressor Shaft Bolt | 19 | - | 168 |
| Flange to Housing Screw (Front and Rear) | 2.2 | - | 20 |
| Heater Core Bracket Screw (Front) | 2.2 | - | 20 |
| Heater Core Tube to Heater Core Clamp Screws (Front) | 1.7 | - | 15 |
| Heater Core Tube Bracket Screw (Front) | 2.2 | - | 20 |
| HVAC Air inlet Duct to Dash Panel Nuts | 4.5 | - | 40 |
| HVAC Housing Screws | 2.2 | - | 20 |
| HVAC Housing to Dash Panel Nuts | 4.5 | - | 40 |
| HVAC Housing to Instrument Panel Nuts | 4.5 | - | 40 |
| Rear Heater-A/C Housing to Body Bolts | 3 | - | 26 |
| Rear Heater-A/C Housing Screws | 2.2 | - | 20 |
| Refrigerant Line to A/C Compressor Nut | 20 | 15 | - |
| Refrigerant Lines to A/C Condenser Nut | 20 | 15 | - |
| Refrigerant Lines to A/C Expansion Valve Nut (Front and Rear) | 20 | 15 | - |
| Refrigerant Line to Refrigerant Line Nut (Front and Rear) | 20 | 15 | - |