LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Durango Pursuit >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 ((Active Damping Control Module (ADCM) - SRT8 - Electrical Diagnostics)) >> DTC Troubleshooting >> C15BF-2A-Damping Mode Button - Stuck >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different variant/trim than selected.

The Active Damping Control Module (ADCM) detects the Damping Mode button switch information by receiving messages from the CAN communications bus. Specifically the UP button is wired to the cluster, the cluster sends this information via CAN I to the BCM, and BCM sends it onto the ADCM via CAN C.

scientia non olet · About LEMON Manuals