When Monitored

WARNING: This page is about a different variant/trim than selected.

This diagnostic runs when the following conditions are met:

Battery voltage is above 10.9 volts.
The Dual Stage Oil Pump circuit fault and stuck high fault are not active.
There are no active Engine Oil Pressure Sensor faults.
Engine running and the engine speed and engine oil temperature are high enough for the Oil Pump Solenoid to be commanded on.
- When the engine oil temperature is lower, the engine speed necessary to enable the Dual Stage Oil Pump will be lower. The minimum engine speed can be between 1000 - 3500 rpm depending on oil temperature.