LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Durango Pursuit >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Emissions Control - 3.6L) >> Exhaust Gas RECIRCULATION >> Sensor, EGR Temperature >> Installation

Sensor, EGR Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Clean the EGR temperature sensor sealing surface.
    GC0173629Courtesy of CHRYSLER GROUP, LLC
  2. Install EGR temperature sensor (1) and tighten to the proper specifications. Refer to EXHAUST GAS RECIRCULATION, TECHNICAL SPECIFICATIONS .
    GC0173589Courtesy of CHRYSLER GROUP, LLC
  3. Connect EGR temperature sensor wire harness connector (1).
  4. Connect the negative battery cable.
  5. Install the engine cover. Refer to COVER, ENGINE, INSTALLATION .
scientia non olet · About LEMON Manuals