Valve, Positive Crankcase Ventilation (PCV), 3.6L: Installation: 6.4L

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

Check the condition of the two PCV valve O-rings (2), replace if necessary.
Clean the PCV valve mounting surface of the intake manifold opening.
Apply engine oil to the two O-rings (2) on the PCV valve.

Courtesy of CHRYSLER GROUP, LLC
Position the PCV valve (1) into intake manifold and rotate 90 degrees clockwise until the locating tabs are locked in place.