LEMON Manuals
: Even more car manuals for everyone
Home
>>
Dodge and Ram
>>
2018
>>
Durango Pursuit
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 11 (3.6L - DTCS P2100 To U0121)
>>
DTC Troubleshooting
>>
P26E4-Starter Control 2 Circuit
>>
Set Condition
Set Condition
WARNING:
This page is about a different variant/trim than selected.
The Powertrain Control Module (PCM) receives a CAN C message from the Body Control Module (BCM) that there is a fault present for the Starter Relay 2.