DECKLID/Hatch/Liftgate/Tailgate/Swing Gate: Spoiler: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Remove the header trim (3).
2. Disconnect the electrical connector to the courtesy light (2), if equipped.

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the washer solvent supply hose and the electrical connector.

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the liftgate trim panels (2). Refer to PANEL, TRIM, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

5. Remove the nuts (1).
6. Lower the liftgate.
7. Pivot the spoiler (2) towards the front of the vehicle.
8. Separate the washer solvent grommet.
9. Remove spoiler from vehicle.