LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Nag1 Automatic Transmission (Service Information)) >> Seal, Torque Converter Hub >> Removal

Seal, Torque Converter Hub: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the torque converter. Refer to TORQUE CONVERTER, REMOVAL .
  2. Remove the torque converter hub seal with suitable screw and slide hammer.
scientia non olet · About LEMON Manuals