LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Nag1 Automatic Transmission (Service Information)) >> Seal, Fill Tube >> Removal

Seal, Fill Tube: Removal

WARNING: This page is about a different variant/trim than selected.
GC0081285Courtesy of CHRYSLER GROUP, LLC
1 - WATER SHIELD
2 - WATER SHIELD BOLTS
  1. Lift and support the vehicle.
  2. Remove water shield bolts and water shield (if equipped).
    GC0081286Courtesy of CHRYSLER GROUP, LLC
    1 - FILL TUBE
    2 - FILL TUBE BOLTS
    3 - FILL TUBE SEAL
  3. Remove the transmission fill tube bolts (2).
  4. Lift the transmission fill tube out of the transmission case.
  5. Using a small pry tool remove the transmission fill tube seal.
scientia non olet · About LEMON Manuals