Pump, Transmission Oil: Assembly
WARNING: This page is about a different variant/trim than selected.
 Courtesy of CHRYSLER GROUP, LLC
|
| 1 - INNER OIL SEAL |
| 2 - OUTER OIL SEAL |
- Install new inner oil pump seal (1) with Seal Installer 8902A.
- Replace O-ring (2).
 Courtesy of CHRYSLER GROUP, LLC
|
| 1 - OUTER PUMP ROTOR |
| 2 - INNER PUMP ROTOR |
- Lubricate pump gears and place in the pump housing. Insert pump gear (1) so that the chamfer (arrow) points towards the pump housing.