LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (BW44-40 Transfer Case (Service Information)) >> Sensor, Transfer Case Temperature >> Removal

Sensor, Transfer Case Temperature: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0095859Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the wire harness connector from the Transfer Case Temperature sensor(1).
    GC0095857Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Transfer Case Temperature sensor (4) from the Transfer Case housing.
scientia non olet · About LEMON Manuals