LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) >> Lamp, License Plate >> Removal >> Lamp

Lamp, License Plate: Removal: Lamp

  1. Disconnect and isolate the battery negative cable.
    GC0170225Courtesy of CHRYSLER GROUP, LLC
  2. Using a trim stick, release (1) the license plate lamp from the rear fascia.
    GC0170251Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the license lamp from the wiring harness connector.
scientia non olet · About LEMON Manuals