Engine Oil Life Reset

Vehicles Equipped With Keyless Enter-N-Go™ 

1. Without pressing the brake pedal, press the ENGINE START/STOP button and place the ignition to the ON/RUN position (do not start the engine.)
2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.
3. Without pressing the brake pedal, press the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.

Secondary Method Of Navigating To The Oil Life Screen 

Use the steering wheel controls for the following procedure(s):

1. Without pushing the brake pedal, cycle the ignition to the ON/RUN  position (do not start the engine.)
2. Push and release the DOWN  arrow button to scroll downward through the main menu to" Vehicle Info  ".
3. Push and release the RIGHT  arrow button to access the "Oil Life"  screen.
4. Push and hold the OK  button for one second to access the " Oil Life Reset"  screen.
5. Push and release the DOWN  arrow button to select" Yes"  , then push and release the OK  button to select reset of the Oil Life.
6. Push and release the Up  arrow button to exit the screen.