Set Condition
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The HVAC Module uses a pulse feedback to the HVAC Module to detect the total door movement range. If the amount of pulses required to move the door completely in both directions is less than what the HVAC Module has stored in its memory, this DTC will set. If an Actuator Calibration Test is performed and the HVAC Module detects a valid range of the door movement span in both directions, the DTC will change from Active to Stored and will stay in the controllers memory for 100 ignition cycles.