Vented Seats
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The vented seat system is designed to enhance the thermal comfort of the driver and front seat occupant, when desired. Occupant comfort is achieved by pulling air from the outside of the seating surfaces into the seat back and cushion of the seat. A vehicle with vented seats can be identified by the vented seat switches (2) located in the Radio Receiver Modules (RRM) U-Connect touch screen.
Each vented seat switch illuminates when the vented seat system is on.
The vented seat system consist of the following major components (there are two different available seat modules, the HSM and the CSWM):
- Vented Seat Pads - Refer to PAD, VENTED SEAT, DESCRIPTION for more information.
- Vented Seat Switches - Refer to SWITCH, VENTED SEAT, DESCRIPTION for more information.
- Vented Seat Motors - Refer to MOTOR, VENTED SEAT, DESCRIPTION for more information.
- Heated Seat Module - Refer to MODULE, HEATED SEAT, DESCRIPTION for more information.