U017E-Lost Communication With SEATBELT Sensor 1
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Perform the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION PRE-DIAGNOSTIC PROCEDURE .
NOTE:
This DTC indicates that the Drivers Door Module (DDM) is not sending the required information over the Controller Area Network (CAN) bus. Therefore, the DDM is considered to be the "offending module". The "offending module" will be referred to in the COMMUNICATION PRE-DIAGNOSTIC procedure.
NOTE:
Treat this DTC as a MISSING MESSAGE DTC when performing the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE.