LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (3.6L - DTCS P1E08 To P2AF7) >> DTC Troubleshooting >> P26E4-Starter Control 2 Circuit >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

  1. Attempt to crank the engine, leaving the ignition on.
  2. With the scan tool, read DTCs and record on the repair order.

    Is the DTC active or pending?

    Yes 

    • Refer to DTC INDEX and perform the appropriate Starter Relay 2 diagnostic procedure.

    No