LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, Fog, Front >> Removal >> Bulb >> Except SRT

Except SRT

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.

Fig 1: Removing/Installing Bulb
GC0139120Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Reach through the outboard opening in the front of the front wheel house splash shield to access the back of the front fog lamp.
  3. Disconnect the headlamp and dash wire harness connector from the front fog lamp bulb connector receptacle.
  4. Firmly grasp the bulb by the two latch features (2) and squeeze them together to unlock the bulb from the back of the front fog lamp housing (3).
  5. Pull the bulb straight out from the keyed opening in the housing.