LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Lamps/Lighting - Interior (Service Information)) >> Lamp, Dome >> Installation >> Lamp - Second Or Third Row

Lamp - Second Or Third Row

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the dome lamp housing close enough to the headliner mounting hole to access and connect the wire harness connector to the back of the lamp.
  2. Engage the legs on the front of the lamp housing with the appropriate mounting holes in the headliner.
    Fig 1: Tension Clips
    GC0172116Courtesy of CHRYSLER GROUP, LLC
  3. Using hand pressure, press the lamp upward firmly and evenly into the headliner mounting hole until the lamp retainers (1) snap into place.
  4. Connect the battery negative cable.