Lamp, Courtesy, Liftgate: Removal: Bulb
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the lamp (3) from the liftgate trim panel. Refer to LAMP, COURTESY, LIFTGATE, REMOVAL .
- Using a small thin-bladed screwdriver, gently pry the latch features of the lamp lens (5) away from the lamp housing and remove the lens from the housing.
- Pull the base of the bulb (4) straight out of the bulb holder within the lamp housing.