Lamp, Courtesy, Liftgate: Installation: Lamp
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Align the liftgate lamp (2) to the mounting hole in the face of the liftgate trim panel (1).
- Using hand pressure, press the lamp firmly and evenly into the mounting hole until the lamp latch features snap into place.
- Reconnect the wire harness connector (3) to the back of the lamp housing.
- Reinstall the trim onto the liftgate inner panel. Refer to PANEL, TRIM, INSTALLATION .
- Reconnect the battery negative cable.