Flashlight, Rechargeable: Installation: Installation
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Align the bezel/charging station (1) with the mounting hole near the rear of the left quarter trim panel (2).
- Using hand pressure, push the bezel/charging station into the mounting hole firmly and evenly until all 6 of the spring clip retainers (3) snap into place on the back side of the trim panel.
- Reconnect the body wire harness connector (4) to the connector receptacle on the back of the bezel/charging station.
- Reinstall the left quarter trim panel. Refer to PANEL, QUARTER TRIM, INSTALLATION .
- Reconnect the battery negative cable.