Nozzle, Washer: Removal: Front

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Washer Hose, Hood Panel, Hood Hinge, Washer Nozzles & Hood Reinforcement

Courtesy of CHRYSLER GROUP, LLC

From the underside of the hood (4), remove the push-in retainers that secure the rear edge of the hood silencer pad to the inner hood reinforcement (5) as necessary to access the front washer nozzle (1) hose connections.
From the underside of the hood, disconnect the washer nozzle hose (2) fitting from the barbed nipple of the front washer nozzle.
From the underside of the hood, release the integral latch features of the front washer nozzle and push the nozzle out through the mounting hole toward the top side of the hood.
Remove the washer nozzle from the top of the hood panel.