LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 ((Forward Facing Camera Module (FFCM) - Electrical Diagnostics)) >> Standard Procedure >> Forward Facing Camera Verification Test >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
  2. With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
  3. Make sure that all accessories are turned off and that the battery is fully charged.
  4. If the FFCM was replaced or moved in any way, with the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to CALIBRATION PROCEDURE
  5. With the scan tool, read FFCM DTCs.

    Are there any DTCs present in the FFCM?

    Yes 

    No 

    • Repair is complete.