LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (8HP70 Automatic Transmission (Service Information)) >> Seal, Output Shaft >> Removal >> All Wheel Drive

All Wheel Drive

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Output Shaft Seal
GC0152271Courtesy of CHRYSLER GROUP, LLC
  1. Remove the transfer case. For MP2010, refer to REMOVAL . For MP3023, refer to REMOVAL .
  2. Remove the output shaft seal (1) with suitable screw and slide hammer.
scientia non olet · About LEMON Manuals