LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Components, Radio Noise Suppression >> Installation >> Hood To Body

Hood To Body

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Two Retainers, Fender Stud & Ground Strap
GC0145463Courtesy of CHRYSLER GROUP, LLC
  1. Install the ground strap (1) on the hood and fender studs (2).
  2. Install the two retainers (3).

    Tighten to 17 N.m (13 ft.lbs.).