LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Message Center (Service Information)) >> Sensor, Ambient Temperature >> Removal >> Removal

Sensor, Ambient Temperature: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wire Harness Connector, Ambient Temperature Sensor & Push Pin Type Retainer
GC0145862Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the radiator grille assembly. Refer to GRILLE, REMOVAL .
  3. Disconnect the wire harness connector (3) from the ambient temperature sensor (2).
  4. Remove the push pin type retainer (1), and remove the sensor.
scientia non olet · About LEMON Manuals