LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Emissions Control) >> Exhaust Gas RECIRCULATION Valve >> Sensor, EGR Temperature >> Removal >> Removal

Sensor, EGR Temperature: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL .
  2. Disconnect and isolate the negative battery cable.
    Fig 1: EGR Temperature Sensor Wire Harness Connector
    GC0173589Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the EGR temperature sensor wire harness connector (1).
    Fig 2: EGR Temperature Sensor
    GC0173629Courtesy of CHRYSLER GROUP, LLC
  4. Remove the EGR temperature sensor (1) from EGR cooler.
scientia non olet · About LEMON Manuals