Valve, Positive Crankcase Ventilation (PCV), 3.6L: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: PCV Valve - 5.7L

Courtesy of CHRYSLER GROUP, LLC

Check the condition of the two PCV valve O-rings (2), replace if necessary.
Clean the PCV valve mounting surface of the intake manifold opening.
Apply engine oil to the two O-rings (2) on the PCV valve.

Fig 2: PCV Valve
Courtesy of CHRYSLER GROUP, LLC
Position the PCV valve (1) into intake manifold and rotate 90 degrees clockwise until the locating tabs are locked in place.