LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Emissions Control) >> Evaporative Emissions >> Solenoid, Evaporative Emissions Purge >> Removal >> 3.6L

Solenoid, Evaporative Emissions Purge: Removal: 3.6L

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL .
  2. Disconnect and isolate the negative battery cable.
    Fig 1: Vapor Purge Line & Wire Harness Connector
    GC0173617Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1) from the EVAP purge solenoid.
    Fig 2: Vapor Purge Line
    GC0173646Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the vapor purge line (1) from the purge solenoid.
    Fig 3: Purge Solenoid Vacuum Hose & Purge Solenoid
    GC0173730Courtesy of CHRYSLER GROUP, LLC
  5. Disengage the purge solenoid vacuum hose (1) and remove the purge solenoid (2) from the intake manifold.
scientia non olet · About LEMON Manuals