LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Ignition System (Service Information)) >> Coil, Ignition >> Removal >> 5.7L

Coil, Ignition: Removal: 5.7L

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying 5.7L Ignition Coil
GC0082813Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the electrical connector (1) from the coil (3).
  2. Clean the area at the base of the coil with compressed air before removal.
    NOTE:

    The ignition coil mounting bolts are retained in the ignition coil.

  3. Remove the two ignition coil mounting bolts (2).
    Fig 2: Removing/Installing Ignition Coil
    GC0080076Courtesy of CHRYSLER GROUP, LLC
  4. Carefully pull up the ignition coil (1) from the valve cover.
  5. Remove ignition coil (1) from vehicle.
scientia non olet · About LEMON Manuals