Capacitor, Ignition: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Connector, Mounting Bolt & Ignition Coil Capacitor

Courtesy of CHRYSLER GROUP, LLC

Install the ignition capacitor (2) and bolt (3). Tighten the bolt to 10 N.m (89 in. lbs.).
Connect the ignition capacitor electrical connector (1).

Fig 2: Cowl Extension Silencer, Side Extensions & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the cowl extension silencer (1). Refer to SILENCER, COWL EXTENSION, INSTALLATION .
Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).