LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (8HP45/845RE Automatic Transmission (Service Information)) >> Standard Procedure >> C-Clutch Measurement

C-Clutch Measurement

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using (special tool #8901A, Pressing Tool) (2) and (special tool #10429, Gauge, Force) (1) place the C-clutch (3) in a suitable arbor press (with the backing plate facing up).
  2. Apply 200 N (45 lbs.) of force to the C-clutch to compress the wave plate.
  3. With a suitable feeler gauge, measure the gap between the C-clutch backing plate and the C-clutch retainer.
  4. Refer to CLUTCH SPECIFICATIONS  for specs. If clearance is not within specification a thinner or thicker selectable backing plate can be installed to achieve proper clearance.
Fig 1: Measuring Gap Between C-Clutch Backing Plate & C-Clutch Retainer
GC0154623Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals