A-Clutch Measurement

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Adapter & Pressing Tool

Courtesy of CHRYSLER GROUP, LLC

Using (special tool #10428, Adapter, Pressing Tool) (1) and (special tool #10429, Gauge, Force) (2) Place the A-clutch/oil pump assembly in a suitable arbor press.
Apply 200 N (45 lbs.) of force to the A-clutch backing plate to compress the wave plate.

Fig 2: Measuring Gap Between A-Clutch Backing Plate & Snap Ring
Courtesy of CHRYSLER GROUP, LLC
With a suitable feeler gauge (2) measure the gap between the A-clutch backing plate and the snap ring.
Refer to CLUTCH SPECIFICATIONS for specs. If clearance is not within specification, a thinner or thicker selectable snap ring can be installed for proper clearance.