Clutch C Disassembly

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wave, Friction, Backing & Steel Plates

Courtesy of CHRYSLER GROUP, LLC

1. Wave plate

2. Friction plate

3. Backing plate

4. Steel plate

Fig 2: Special Tool, C-Clutch & Snap Ring

Courtesy of CHRYSLER GROUP, LLC

Place the C-clutch (2) in a suitable press.
Using special tool 8680 (1) compress the C-clutch (2) enough to remove the snap ring (3).
Remove the snap ring (3).

Fig 3: C-Clutch & Retainer
Courtesy of CHRYSLER GROUP, LLC
Remove the C-clutch retainer (1).

Fig 4: Friction Plates & Retainer
Courtesy of CHRYSLER GROUP, LLC
Remove the C-clutch piston (1).

Fig 5: Friction Plates & Belleville Spring
Courtesy of CHRYSLER GROUP, LLC
Remove the belleville spring (1).

Fig 6: Wave Plate
Courtesy of CHRYSLER GROUP, LLC
Remove the wave plate (1).

Fig 7: Friction & Steel Plates
Courtesy of CHRYSLER GROUP, LLC
Remove the 6 friction and steel plates (1).

Fig 8: Backing Plate
Courtesy of CHRYSLER GROUP, LLC
Remove the backing plate (1).

Fig 9: Clutch Hub, C-Clutch Shaft & O-Rings
Courtesy of CHRYSLER GROUP, LLC
Separate the clutch shaft (3) from the clutch hub (1).
Remove two O-rings from the C-clutch shaft (2).