Theory Of Operation
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The Intake Air Temperature (IAT) Sensor is a variable resistor that functions as a normal two wire, 5 volt sensor. The Powertrain Control Module (PCM) supplies the IAT Sensor with a 5 volt reference and a filtered ground (return) circuit. For the IAT Sensor diagnostic, the PCM internally monitors the voltage on the signal circuit, which is converted into a temperature reading. If the voltage reads above the high calibrated threshold, or below the low calibrated threshold, a circuit high or low fault is set.